DRESSTA Co. Ltd. TD-40C98/1E — 4.19. OPERATING TECHNIQUES

OPERATING SECTION 4 Page 35 OPERATING TECHNIQUES When clearing trees, raise the blade high to gain leverage and make contact gently to reduce possible harm to the operator and machine (Fig. 4.36). Heavy roots of large trees may require pushing and digging or cutting from several sides of the tree. Use a cable to topple and remove trees from soft ground (Fig. 4.37). Fig. 4.36. Machine Equipped with Sweeps Fig. 4.37. Using Cable to Remove Trees WARNING! Falling trees and dead limbs can cause injuries. When clearing trees, operator protection must be used.

When clearing a rocky area, remove the small and loose rocks first, large and solid rocks can then be loosened and moved with less difficulty. When loosening large or solid rocks, greater force and penetration can be obtained by tilting the blade and prying under the rock with the lower edge of the blade (Fig. 4.38). Lifting the rock with the blade while pushing will increase traction and reduce track spinning Fig. 4.38. Loosening Rocks with Lower Edge of the Blade DRESSTA TD-40C