DRESSTA Co. Ltd. TD-40C98/1E — 4.19. OPERATING TECHNIQUES

SECTION 4 OPERATING Page 38 OPERATING TECHNIQUES Method 2 Fig. 4.43. Breaking Down a Pile 1. Ramp 2. Original Slope When trucks or wagons are used for hauling, bulldozers are ideal spreading tools at the fill (Fig. 4.44). Blade should be kept in a straight position so that material is drifted directly under the cutting edge (Fig. 4.45). When finishing in non-solid materials, such as earth, drag the blade backward for a smooth job as shown in Fig. 4.45. Rock, of course, may damage the blade base, therefore, such practice is not recommended where abrasive material is common. Fig. 4.44. Spreading Material Forward TD-40C DRESSTA