Komatsu — HYDRAULIC TANK SERVICE

Maintenance - Section 4 OM4010 05/07 Page 4-14 Lubrication and Service HYDRAULIC TANK SERVICE 5. If hydraulic components have been removed and lines drained, start the engine and raise the dump body several times to circulate oil and fill all system voids. Filling Instructions (Hoist Oil Supply) 1. Park the truck on a level surface, lower the dump body, and turn off the engine. Before raising body, ensure that the truck is in an area where there is sufficient overhead clearance to allow the body to be raised. Any operating fluid, such as hydraulic oil or brake oil, escaping under pressure, can have suf- ficient force to enter a person's body by penetrat- ing the skin.

Serious injury and possibly death may result if proper medical treatment by a phy- sician familiar with this injury is not received immediately. 6. Lower the dump body and turn off the engine. Repeat steps 2 through 4, if necessary. 2. Turn oil filler cap (3, Figure 4-3) slowly counter- clockwise to release internal tank pressure. Filling Instructions (Rear Brake Cooling Oil Sup- ply) 1. Park the truck on a level surface, lower the dump body, and turn off the engine. Any fluid escaping under pressure can have suf- ficient force to enter a person's body by penetrat- ing the skin.

Serious injury and possibly death may result if proper medical treatment by a phy- sician familiar with this injury is not received immediately. FIGURE 4-3. HYDRAULIC TANK 1. Filter Covers 2. Bolts 3. Hydraulic Oil Filler Cap 4. Hydraulic Oil Level Sight Glass 5. Hydraulic Oil Drain 6. Brake Oil Drain 7. Brake Cooling Oil Sight Glass 8. Brake Cooling Oil Filler Cap 9. Breather 2. Turn oil filler cap (8, Figure 4-3) slowly counter- clockwise to release internal tank pressure. 3. Fill tank with recommended oil until the level is visible in the center portion of sight glass (7). To reduce rear brake squeal, use ONLY SHELL DONAX - TD Oil or BP TRACTRAN UTH.

If these oils are not available, refer to Lube Key C. Hydraulic tank refill capacity: . . . . . . . . . . . . . . . . . . . . . . . . 162 Liters (42.8 gal.) Rear brake oil tank refill capacity: . . . . . . . . . . . . . . . . . . . . . . . . 268 Liters (70.8 gal.) 3. Fill tank with recommended oil until the level is visible in the center portion of sight glass (4). Refer to Lube Key C. 4. Replace fill cap.