Komatsu — Check Transmission Oil Level, Add Oil

MAINTENANCE Check Transmission Oil Level, Add Oil The parts and oil are VERY HOT immediately after the engine is stopped and may cause burns, if touched. Wait for the temperature to drop before starting the work. Do this procedure if there is any sign of oil on the transmission case or if there is oil mixed with the cooling water. Remark Wait for at least eight hours after stopping the engine before carrying out the inspection. If this is not done, there will be oil remaining at various places and it will be impossible to check the oil level correctly. The fill port (A) is located on the right side of the machine, inside the articulation area. 1. Stop the engine. 2.

Remove the cap of oil filler (F). 3. Take out the dipstick (G) and use a cloth to wipe off the oil. The dipstick has two level marks on one side: ENG STOP (for measuring when the engine is stopped) and ENG IDLE (for measuring when the engine is idling). 3-28 WA500-3LK