Komatsu — Check Axle Oil Level, Add Oil

MAINTENANCE Check Axle Oil Level, Add Oil When checking the oil level, apply the parking brake and lock the front and rear frames with the safety bar. After stopping the engine, the parts and oil are VERY HOT. Wait for the temperature to go down before starting this operation. Do this procedure if there is any sign of oil on the axle case. The machine must be parked on a horizontal road surface. If the road surface is at an angle, the oil level cannot be checked correctly. 1. Park the machine on a horizontal surface. 2. Stop the engine. 3. Wait for the oil temperature to go down. 4. Remove oil level plug (1). 5. Check that the oil level is near the bottom of the plug hole.

If the oil is not near the bottom of the plug hole, add axle oil through plug hole (F). 6. If the oil level is correct, install plug (1). Tightening torque:. . . . . . . . . . . . 152 ±24.5 N•m (112.1 ±18.1 lbf ft) 3-30 WA500-3LK