Clean Axle Case Breather MAINTENANCE When cleaning the axle breather, apply the parking brake and lock the front and rear frames with the safety bar. 1. Park the machine on a horizontal surface. 2. Stop the engine. 3. Use a brush to clean off the mud and dirt from around the breather. 4. Remove the breather. Remark When removing the breather, be careful that dirt and dust do not get into the axle case. 5. Soak the breather in cleaning fluid and clean it. 6. Clean the breather at two places (front and rear). 7. Install the breather. WA500-3LK 3-31