Komatsu — Check Window Washing Fluid Level, Add Fluid

MAINTENANCE Clean Air Conditioner Condenser Do not wash the condenser using a steam cleaner. There is danger that the condenser could overheat. If high-pressure water hits your body directly or the water sends dirt flying, there is danger of personal injury. Always wear protective glasses, dust mask, and other protective equipment. The air conditioner condenser is located in the bulkhead behind the cab. If there is mud or dust on the air conditioner condenser, clean it with water. If the water pressure is too high, the fins may get deformed. When washing with a high-pressure washer, apply the water from a reasonable distance. 1. Park the machine on a horizontal surface. 2. Stop the engine.

3. You can wash the condenser by directing the water jet through the vent slots on the top of the bulkhead or at the front of the bulkhead. 4. If you suspect that the condenser requires a more thorough cleaning, it is possible to remove the bulkhead hood to access the condenser. See Removal of Bulkhead Assembly in the Disassembly and Assembly section of the Shop Manual . Remark Removing the bulkhead hood is a very labor-intensive process.Try to clean the condenser through the vent slots before resorting to removing the bulkhead hood. Check Window Washing Fluid Level, Add Fluid The washing fluid tank is located in the bulkhead behind the cab. 1.

Open the top cover (1) on the top, right side of the bulkhead. 2. Check the washing fluid levels in washer tank (2). 3. Add automotive window washing fluid as required. Remark Be careful not to let dirt and dust get into the fluid. 3-32 WA500-3LK