3. Detach cap (5) and middle plug (6) from the new grease cartridge and tightly screw it into the suction port connector. OPTIONS, ATTACHMENTS Screw the cartridge in tightly to make sure that no air enters. 4. If when fixing the cartridge to the connector the grease cartridge is pressed slightly so that grease comes out and deposits in a heaped shape, no air will enter if the grease cartridge is screwed into the suction port connector under these conditions. Remark The maximum number of turns is five (5). 5. Turn the cover to the right and tighten it until it is securely fixed. If it is not tightened well, there is a possibility that it will work loose due to the machine vibration.
See the Shop Manual for additional information about the auto-grease system: Filling the auto-grease system with grease Specifications Electrical schematics Use the brands of grease shown in the following table. Precautions When Handling Auto-Greasing System The power source input to the lubrication controller should be DC24V, but use a maximum limit of 30V. The grease nipple installed to the service port used for initial charging of the divider valve has a ball check structure; it may leak if dirt gets stuck in it. Check the grease nipple occasionally and replace it immediately if any grease is leaking.
When carrying out initial operation or when the grease tank is empty, air may get into the piston portion of the pump. If the pressure does not rise within the specified time when running the pump and an error is displayed for the controller, bleed the air. If the divider valve or grease piping is removed when replacing the attachment on the machine, handle them carefully to prevent any damage. When storing or installing them, be extremely careful to prevent the entry of air, and particularly dirt. If there is any air in the system, bleed the air immediately.
WA500-3LK 5-13 Type Name Grease Capacity Manufacturer GSL-2-100 Reservoir grease No.2 Albania EP No.2 1000 cc Showa Shell Sekiyu GKL-2-100 Uni reservoir grease DL-2 Unilube DL No.2T 1000 cc Kyodo Yushi