Komatsu — INDICATOR LIGHT SYMBOLS

Operation - Section 3 OM3214 Page 32-20 Operator Cab and Controls C3. Body Up This amber Body Up indicator, when illuminated, shows that the body is not completely down on the frame. The truck should not be driven until body is down and light is off. A4. NOT USED Reserved for future use or options. D3. Dynamic Retarding B4. Manual Backup Lights This amber dynamic retarding indicator light illuminates when the retarder pedal is operated, RSC (Retarder Speed Control) is activated, or the automatic over- speed retarding circuit is ener- gized, indicating the dynamic retarding function of the truck is operating.

This amber indicator will illumi- nate when the manually oper- ated Manual Backup switch (3, Figure 32-6, Instrument Panel) is turned ON. C4. Engine Shutdown Timer - 5 Minute Idle When the Engine Shutdown Timer switch has been activated (2, Figure 32-11, Instrument Panel), this indicator light will illuminate to indicate that the shutdown timing sequence has started. Refer to Instrument panel for operation of this switch. E3. Stop Engine This RED engine monitor warn- ing light will illuminate if a seri- ous engine malfunction is detected in the electronic engine control system.

Electric propul- sion to the wheel motors will be discontinued and the maximum engine speed will be reduced to 1250 RPM. Dynamic Retarding will still be available if needed to slow or stop the truck. D4. Retard Speed Control Indicator This amber light is illuminated when the RSC switch mounted on the console is pulled out to the ON position. Stop the truck as quickly as possible in a safe area and apply parking brake. E4. Check Engine Monitor (DDC) SHUT DOWN THE ENGINE IMMEDIATELY. Addi- tional engine damage is likely to occur if opera- tion is continued. This indicator light used for trucks equipped with DDEC engines only. r r C