2-15 TIMER TEST OPERATING PROCEDURE 1. Connect the power plug to the receptacle on the vehicle. 2. The initial timer test screen appears on the display. 3. When buttons (1) and (2) and are pressed at the same time to start the timer test, “NOW TESTING!” will appear on the screen. The bars indicating charge light up at a rate of one per second as the test proceeds. When ten bars are lit up after 10 seconds, the test is complete and “TEST COMPLETED” appears on the screen. The LEDs on the operation panel come on in the order of (3) (4) (5). The magnetic switch turns on when “NOW TESTING!” is displayed, and turns off upon display of “TEST COMPLETED” about ten seconds later. 4.
The initial screen reappears when any of buttons (1) to (2) is pressed.