Toyota — GS

2-38 Inspection: Inspect the transformer continuity. [POINT 2] Inspection: Inspect the magnetic switch contact continuity. Inspection: Inspect the magnetic switch coil continuity. Inspection: Inspect the thermal relay contact continuity. Note: Do not adjust the thermal relay operating current. If the thermal relay is operated to stop charging while the charger is in use, always check the cause of thermal relay operation, and reset the thermal relay after taking the remedial action.

Circuit test range Ω × 1 Measurement terminals Primary side U −V , V −W and W −U 1 1 1 1 1 1 Secondary side U −V , V −W and W −U 2 2 2 2 2 2 0 Ω Standard value Circuit tester range Ω × 1 Measurement terminals T−W, S−V, R−U Switch ON 0 Ω OFF ∞ Ω Resistance between A1 and A2 Circuit tester range See the Service Standard list. Ω × 1 Circuit tester range Ω × 1 Measuring terminals 95−96 Switch Not operated 0 Ω In operated state ∞ Ω