SERVICE PROCEDURE MAINTENANCE When It is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to check the electrolyte level from the side of the battery, or there is no display of the UPPER LEVEL line on the side of the battery, check as follows. 1. Remove nuts (2) (2 places) of cover (1), then remove the cover. 2. Remove cap (3), and check the battery electrolyte is up to the UPPER LEVEL line. If the level is low, add distilled water. Do not add water above the UPPER LEVEL line. This may cause leakage of the electrolyte, which may cause fire. Use the diagram below for reference, and check if the electrolyte reaches the bottom of the sleeve. 3.
After adding distilled water, tighten cap (1) securely. REMARK If distilled water is added to above the bottom of the sleeve, use a pipette to lower the level to the bottom of the sleeve. Neutralize the removed fluid with baking soda (sodium bicarbonate), then flush it away with a large amount of water or consult your Komatsu distributor or battery maker. When It is Possible to Use Indicator to Check Electrolyte Level If it is possible to use and indicator to check the electrolyte level, follow the instructions given. 4-38