mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

C. Remove and install oil tank 1. Drain hydraulic oil, look out for sealing ring. 2. Disconnect hose lines as well as ventilation filter. 3. Remove 2 hex. screws M 8 with nuts on bracket of cab and one same on cab itself, remove oil tank. 4. To remove the strainer basket, the cover with gasket must be taken off. 5. The installation is done vice-versa. Picture 55-2/3 1 = Ventilation filter 2 = Return line 3 = Oil level check glass 4 = Tonk cover 6. Fill up hydraulic oil.