mercedes-benz — Mercedes-Benz Unimog 421-411 Service Workshop Manual Volume 1

Disassembly and Assembly of Slave Cylinder 42.3 Disassembly and Assembly 1 Clean exterior of slave cylinder. 1 2 Take off dust caps 2 and remove with thrust pins 3. 3 Remove pistons 4, cup seals 5 and compres sion spring 6. 4 Remove bleed screw 7. 5 Clean all parts with brake fluid or spirit and check. Replace any damaged part. JR 42-0004 6 Assemble in reverse sequence. Note: When dry, pistons must fit snuggly in cylinder bore. Edges of rubber seals must be sharp; running surfaces must not be scored. Prior to assembling, coat cylinder bore, pistons and seals with brake cylinder paste No. 2.