Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK PIVOT BEARING OIL LEVEL, ADD OIL When removing plug (1), be careful not to let dirt or dust get it. (B): 25mm (1inch) CHECK OIL LEVEL IN RECOIL SPRING, ASSIST CYLINDER CASE, ADD OIL in. 2. Loosen the plug and confirm that the internal pressure is released. 4 - 77 Remov When r e plug ( emovin 1). g plu 2. Check that the oil is up to oil level (2) i n the diagram.

If the oi l level i s low , add oil through th e hole for plug (1) Remov When r e bolts emovin (1), t g the hen re cover move cover ( , be careful n Insert a sca le and chec k that t he oil level is 70 to 80 mm (2.8 to 3.2 in If ) from the the oil is i bottom edg nsufficient, e of th add oil e inspection port. .