Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 10 (CYLINDER HEAD) Torque screws to 9 N•m (80 lbf• in ) as per follow- ing illustrated sequence. smr2008-017-005_a 1. Cylinder head cover screws 5. Remove the cylinder head cover and its gasket. CYLINDER HEAD COVER Cylinder Head Cover Removal 1. Open seat. 2. Remove the rear ventilation cover. 3. Unplug and remove ignition coils. smr2006-016-028_a 1. Cylinder head cover 2. Gasket Cylinder Head Cover Inspection Check if the gasket on the cylinder head cover and the rubber bushing on the cylinder head cover screws are brittle, cracked or hard. If so, replace the gasket or the cylinder head cover screw ac- cordingly.

Cylinder Head Cover Installation For installation, reverse the removal procedure. However, pay attention to the following. Properly seat the gasket in the cover groove. Install the cylinder head cover screws according to following sequence. smr2009-025-005_a 1. Ignition coils 4. Remove screws securing the cylinder head cover. smr2009-025 133