Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 10 (CYLINDER HEAD) smr2005-036-001_a TYPICAL 1. Spark plug tube 2. Seal to the cylinder head cover 3. Seal to the cylinder head Spark Plug Tube Installation For installation, reverse the removal procedure. Pay attention to the following detail. Apply engine oil on seals. smr2006-016-026_a Torque screws to 9 N•m (80 lbf• in ). SPARK PLUG TUBES Spark Plug Tube Removal Remove the CYLINDER HEAD COVER, see pro- cedure in this subsection. Pull spark plug tubes to remove them. ROCKER ARMS Rocker Arm Removal 1. Remove the CYLINDER HEAD COVER, see procedure in this subsection. 2. Remove spark plug tubes. 3. Remove and discard rocker arm shaft screws. 1. Spark plug tube 1.

Rocker arm shaft screw Spark Plug Tube Inspection Check seals on spark plug tube. If seals are brittle, cracked or hard, replace spark plug tube. 4. Remove rocker arm shaft with rocker arms. 134 smr2009-025