Section 02 ENGINE Subsection 10 (CYLINDER HEAD) smr2008-017-009_a 1. Valve cotters 2. Valve spring retainer 3. Inner valve spring 4. Outer valve spring Valve Spring Inspection Check valve springs for rust, corrosion or other visible damages. If so, replace faulty valve springs. Check valve springs for free length and straight- ness. Replace valve springs if not within specifications. 1. Valve spring compressor clamp 2. Valve spring compressor cup LOCATE VALVE SPRING COMPRESSOR CLAMP IN CENTER OF THE VALVE A. Valve spring length Remove valve cotters. Withdraw valve spring compressor, valve spring retainer and valve springs.
Valve Spring Installation For installation, reverse the removal procedure. Pay attention to the following details. Colored area of the valve spring must be placed on top. 142 smr2009-025 OUTER VALVE SPRING FREE LENGTH NEW NOMINAL 45.45 mm (1.789 in) SERVICE LIMIT 43.00 mm (1.693 in) INNER VALVE SPRING FREE LENGTH NEW NOMINAL 41.02 mm (1.615 in) SERVICE LIMIT 38.8 mm (1.528 in)