Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 03 ELECTRONIC MANAGEMENT SYSTEMS Subsection 04 (MONITORING SYSTEM AND FAULT CODES) smr2009-029 201 FAULT CODE MODULE DESCRIPTION POSSIBLE CAUSE SERVICE ACTION P0261 ECM Injector 1 open circuit or shorted to ground Damaged injector, damaged circuit wires, damaged connector or damaged ECM output pins Check for 11.4 to 12.6 ohms between engine connector pin 1 and ECM connector pin A-B3. Check for 12 volts on pin 2 of injector connector. Check fuse 7 (refer to WIRING DIAGRAM). Check for damaged circuit wires. Refer to the Service Manual for more details.

P0262 ECM Injector 1 shorted to battery Damaged injector, damaged circuit wires, damaged connector or damaged ECM output pins Check for 11.4 to 12.6 ohms between engine connector pin 1 and ECM connector pin A-B3. Check for 12 volts on pin 2 of injector connector. Check fuse 7 (refer to WIRING DIAGRAM). Check for damaged circuit wires. Refer to the Service Manual for more details. P0264 ECM Injector 2 open circuit or shorted to ground Damaged injector, damaged circuit wires, damaged connector or damaged ECM output pins Check for 11.4 to 12.6 ohms between engine connector pin 2 and ECM connector pin A-K1. Check for 12 volts on pin 2 of injector connector.

Check fuse 8 (refer to WIRING DIAGRAM). Check for damaged circuit wires. Refer to the Service Manual for more details. P0265 ECM Injector 2 shorted to battery Damaged injector, damaged circuit wires, damaged connector or damaged ECM output pins Check for 11.4 to 12.6 ohms between engine connector pin 2 and ECM connector pin A-K1. Check for 12 volts on pin 2 of injector connector. Check fuse 8 (refer to WIRING DIAGRAM). Check for damaged circuit wires. Refer to the Service Manual for more details.

P0267 ECM Injector 3 open circuit or shorted to ground Damaged injector, damaged circuit wires, damaged connector or damaged ECM output pins Check for 11.4 to 12.6 ohms between engine connector pin 3 and ECM connector pin A-J1. Check for 12 volts on pin 2 of injector connector. Check fuse 9 (refer to WIRING DIAGRAM). Check for damaged circuit wires. Refer to the Service Manual for more details.