Section 04 FUEL SYSTEM Subsection 01 (INTELLIGENT THROTTLE CONTROL (iTC)) smr2009-030-100_a Step 1: Pry out Step 2: Pull out sensor smr2009-030-102_a 1. Route harness here Revert removal procedure for installation. Pay at- tention to the following. Align sensor pins into their holes. When installation is completed, ensure throttle lever works properly. CRUISE SWITCH Cruise Switch Test If pressing the cruise switch does not engage the CRUISE or SLOW SPEED modes, test the cruise switch as per following procedure. 1. Connect the watercraft to the latest B.U.D.S. software. Refer to COMMUNICATION TOOLS AND B.U.D.S. SOFTWARE subsection for de- tails. 2.
In B.U.D.S., select the Monitoring tab then the Cluster tab. 3. Press the vehicle cruise button and look for the Cruise indicator light to come on in the Switch inputs area. smr2009-030-101_a 1. Align pin into hole Snap sensor in position. Ensure it is properly locked in place. Route harness into the notched bracket. 216 smr2009-050