Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) smr2009-031-002_c 1. Outlet valve If pressure in fuel tank build up and exceed 2.8 kPa - 7.6 kPa (.4 PSI - 1.1 PSI), the outlet valve opens and let excess pressure evacuate outside fuel tank. smr2009-031-008_a 1. Ventilation box Visually inspect condition of hoses and clamps. Pull out inlet valve from its grommet. smr2009-031-002_d 1. Outlet valve INSPECTION smr2009-031-009_a 1. Pull out inlet valve FUEL TANK LEAK TEST Make sure that grommets of inlet and outlet valves are not plugged. Use the VACUUM/PRESSURE PUMP (P/N 529 021 800) . Fuel Tank Test Fill up fuel tank. Close fuel tank cap.
Open front storage compartment cover and re- move storage bin. Remove front ventilation box. 529021800 NOTE: A Y-fitting and a check valve can be in- stalled to use compressed air for quick pressure build-up when fuel tank is not full. 258 smr2009-031