Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) 529036166 Set multimeter to and test pump circuit as per following table. smr2009-031-021_a Repair or replace wiring as required. If every test succeeded and fuel pump still does not work, try a new ECM. Refer to ELECTRONIC FUEL INJECTION subsection. smr2009-031-021_b smr2009-030-015_g If test succeeded, the fuel pump and its wiring harness are good. If test failed, test wiring continuity as per table. Fuel Pump Removal Release fuel pressure. Refer to FUEL PUMP in this subsection. Open front storage compartment cover and re- move storage bin. NOTE: Removing dashboard may help to give some light on the working area.

Remove front ventilation box. 266 smr2009-031 PUMP CIRCUIT TEST THROUGH FUEL PUMP TEST PROBES RESISTANCE @ 20°C (68°F) Fuse box #1 terminal C1 ECM connector B pin B-M1 Approx. 12 FUEL PUMP HARNESS CONTINUITY TEST (WIRING ONLY) TEST PROBES RESISTANCE @ 20°C (68°F) Pump harness connector pin B Fuse box #1 terminal C1 Close to 0 (continuity) Pump harness connector pin A ECM connector B pin B-M1