Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 04 FUEL SYSTEM Subsection 03 (FUEL TANK AND FUEL PUMP) Press new filter on by hand. Ensure it is fully seated and locked onto the pump reservoir hous- ing. Reinstall fuel pump as per procedure in this sub- section. Carry out a FUEL SYSTEM HIGH PRESSURE LEAK TEST as described in this subsection. NOTE: A fuel tank is comprised of 2 components: the tank and the filler neck. The necks are injec- tion molded and the tank is then blow molded over the necks. During the molding process, a small molding seam may appear on the inner side of the necks at approximately 4 mm (5/32 in) from the base of the neck.

It is a normal situation to have a molding seam and it should not be confused with a crack. FUEL TANK Fuel Tank Inspection Open front storage compartment cover and re- move storage bin. NOTE: Removing dashboard may help to give some light on the working area. Remove front ventilation box. 4 2 1 A 3 5 F07F06A 1. Tank upper surface area 2. Inspect outer upper surface at filler neck 3. Normal molding seam 4. Inspect upper surface area inside filler neck 5. Base of filler neck A. Approx. 4 mm (5/32 in) Install filler hose. Reinstall removed parts. Fuel Tank Removal Release fuel pressure. Refer to FUEL PUMP. Remove moving deck. Refer to BODY. Remove engine.

Refer to ENGINE REMOVAL AND INSTALLATION. Remove suspension base. Refer to SUSPEN- SION. Siphon fuel tank. Disconnect fuel pump connections. smr2009-031-008_a 1. Ventilation box Inspect fuel tank retaining straps for wear, cracks or any other damages. Inspect strap clip anchors and bolts. Inspect fuel tank for wear caused by any abnormal contact or rubbing with other component(s). Disconnect fuel filler hose from fuel tank. Inspect fuel tank filler hose for wear, cracks or other damages. Visually inspect the inside and outside of the fuel tank filler necks for crack(s). If crack(s) are found, replace fuel tank.

With your fingers, feel the inside and outside sur- faces of fuel tank, especially near the filler neck. Flex fuel tank necks to ensure there are no hidden cracks. smr2009-031 269