Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION) 6. Drain cooling system. Refer to COOLING SYS- TEM subsection. 7. Cut locking tie securing exhaust water outlet hose and engine blow-by hose. 8. Disconnect the exhaust water outlet hose from the exhaust manifold. 9. Disconnect the hose from the blow-by valve. smr2009-016-005_a 1. Exhaust hose clamp 10.3 Detach retaining strap. smr2009-016-003_a 1. Cut this locking tie 2. Exhaust water outlet hose 3. Blow-by hose 4. Blow-by valve 5. Exhaust manifold 10. Move muffler rearward. 10.1 Unplug the exhaust gas temperature sen- sor (EGTS). smr2009-016-006_a 1. Muffler retaining strap 10.4 Unscrew exhaust clamp.

NOTICE Do not use pneumatic or elec- tric tools on exhaust clamp as seizure may occurs. smr2009-016-004_a 1. EGTS sensor 2. Exhaust hose 10.2 Disconnect the exhaust hose. smr2009-016-007_a 1. Exhaust clamp 10.5 Move muffler back. 11. Remove jet pump. Refer to JET PUMP sub- section. 12. Remove the drive shaft. Refer to DRIVE SHAFT subsection. 16 smr2009-016