Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION) 13. Connect B.U.D.S. Refer to COMMUNICA- TION TOOLS AND B.U.D.S. SOFTWARE subsection. 14. Release fuel pressure using B.U.D.S. 15. Using the FUEL HOSE DISCONNECT TOOL (P/N 529 036 037) disconnect fuel hose from fuel rail. smr2009-016-011_a 1. Ground wires 529036037 19. On top of engine, cut locking ties securing ve- hicle harness and engine connector to engine. 20. Unplug the "B" connector from the ECM. smr2009-016-009_a 1. Fuel rail 2. Fuel hose 3. Fuel hose disconnect tool 16. Disconnect battery. Refer to CHARGING SYS- TEM subsection. 17. Cut locking tie securing wiring harness to oil filler tube. smr2009-016-012_a 1.
Locking tie retaining engine connector 2. Locking ties securing vehicle harness 3. "B" connector 21. Unplug the engine connector. smr2009-016-010_a 1. Cut this locking tie 2. Oil filler tube smr2009-016-013_a 1. Engine connector 22. Cut locking tie securing vehicle harness to manifold air temperature sensor (MATS). 18. Unscrew ground wires from engine. smr2009-016 17