Section 06 STEERING AND PROPULSION Subsection 02 (iBR AND VTS) NOTICE An object or tool caught in the iBR gate, nozzle or linkages when using the iBR override function may cause damage to these components. Remove any foreign object that may obstruct the iBR gate travel. Activating iBR Override Function WARNING When using the iBR override function, en- sure no personnel stands near the rear of the watercraft. Movement of the iBR gate may squeeze fingers. To use the iBR override function, carry out the fol- lowing step. 1. Press the START/STOP button. 2. Install the D.E.S.S. key. smo2009-002-114_y 4. Press the SET button (RH handlebar) to display DOCK MODE. Step 1:
Press START/STOP button Step 2: Install D.E.S.S. key sdd2009-001-019_g smo2009-002-114_bb NOTE: Do not start the engine. The D.E.S.S. key must be installed to ensure the information cen- ter will not shut off all indications after its self test function. Electrical power will stay ON for approx- imately 3 minutes. 3. Press the Mode button on the RH handlebar re- peatedly until SETTINGS is visible in the digital display of the information center. 5. Press the UP/DOWN arrow button to display iBR OVR. smo2009-002-114_ff 6. Press the SET button to enter iBR OVR function and display OVR OFF. smr2009-037 377