Section 02 ENGINE Subsection 01 (ENGINE REMOVAL AND INSTALLATION) smr2009-016-023_a 1. Water outlet hose 2. Exhaust manifold 33. Slightly lift engine to ease the remaining com- ponent removal. 34. Disconnect the water inlet hose from the ex- haust manifold. smr2009-016-020_a 1. Rear engine support screw on starboard side 2. Water pump housing 29. Cut locking tie from coolant hose alongside throttle body that retains the vehicle harness. smr2009-016-021_a 1. Cut this locking tie 2. Throttle body 3. Coolant hose smr2009-016-024_a 1. Exhaust manifold water inlet hose 30. Remove the rear engine support screw on port side. 31.
Cut locking tie securing coolant hoses, starter cable and ground cable. 35. Unscrew starter cable nut. smr2009-016-025_a 1. Starter cable nut 36. Remove screw securing the ground cable to engine. smr2009-016-022_a 1. Rear engine support screw on port side 2. Cut this locking tie 32. Disconnect the water outlet hose from the ex- haust manifold. smr2009-016 19