Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 06 STEERING AND PROPULSION Subsection 03 (JET PUMP) 5. Remove both O-rings. Check impeller boot and O-rings condition on im- peller. Replace as required. smr2009-006-003_a TYPICAL 1. O-rings smr2009-006-004_a 1. Impeller boot 2. Impeller O-ring 3. Pump housing O-ring Impeller Cover Inspection Check for presence of water in cover and bearing area. If water is found, replace seals on impeller side. Also replace O-rings and/or impeller cover. Impeller Cover Installation 1. Install O-rings in their respective groove. '& smr2009-006-002_a 1. Seal on impeller side TYPICAL 2. Put 23 ml (.8 U.S. oz) of JET PUMP BEARING GREASE (P/N 293 550 032) in the cover. smr2009-006-003_a 1.

Cover O-rings TYPICAL ' smr2009-039 415