Section 06 STEERING AND PROPULSION Subsection 03 (JET PUMP) 8. Use the IMPELLER SHAFT PUSHER (P/N 529 035 955) to press impeller shaft out of pump hous- ing. NOTE: Bearing will come out with the impeller shaft. smr2009-006-009_a TYPICAL 5. Remove impeller shaft nut. 529035955_a smr2009-006-010_a TYPICAL smr2009-006-003_b TYPICAL 1. Nut 6. Remove impeller as described in this subsec- tion. 7. From the impeller side, remove circlip, seals, spacer and O-ring. smr2009-006-011 TYPICAL 9. Use the IMPELLER SHAFT BEARING TOOL (P/N 529 036 168) to press bearing off impeller shaft. smr2006-027-007_b TYPICAL 1. Circlip 2. Seal 420 smr2009-039