Section 06 STEERING AND PROPULSION Subsection 03 (JET PUMP) smr2009-006-012_a TYPICAL 1. Impeller shaft and bearing 2. Bearing tool on INNER race smr2009-006-006_a TYPICAL 4. Turn pump upside down and retry unscrewing impeller shaft nut. Impeller Shaft Nut Removal if Impeller has Loosened 1. Turn pump upside down and mount the flat sides of impeller shaft in a vise. smr2009-006-009_a TYPICAL 5. If impeller still loosens instead of nut, retighten impeller more and retry. Repeat until nut loosens. 6. Remove impeller as described in this subsec- tion. 7. Return to step 5 in the IMPELLER SHAFT AND BEARING REMOVAL main procedure. smr2009-006-005_a TYPICAL 1. Flat side 2.
Mount in the impeller splines the appropriate impeller remover/installer tool according to en- gine type. Impeller Shaft and Bearing Inspection With your finger nail, feel seal lip contact surface on shaft. If any irregular surface is found, replace shaft and seals. Check condition of shaft threads. 3. Torque impeller more than impeller shaft nut. smr2009-039 421 MODEL TOOL 130 and 155 engines IMPELLER REMOVER/INSTALLER (P/N 529 035 820) 215 and 255 engines IMPELLER REMOVER/INSTALLER (P/N 529 035 956)