Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 01 (SUSPENSION (iS)) smr2009-041-016_a 1. Cut this locking tie 2. Hydraulic hose smr2009-041-019_a 1. Socket screw 2. Hydraulic hose lock 6. Unscrew the retaining clamp completely and re- move it. 9. Remove hose from pump and plug hose to avoid oil spillage. 10. Place your finger on pump opening and re- move pump from vehicle. NOTE: Wipe any oil spillage. Hydraulic Pump Installation (Without Actuator) 1. Install hydraulic hose on pump and secure hose using the the hydraulic hose lock. NOTE: The hose must turn freely. Do not inserted hose into lock hook. smr2009-041-017_a 1. Retaining clamp 2. Hydraulic pump 7. Remove hydraulic pump retaining bolt.

smr2009-041-020_a WRONG POSITION smr2009-041-018_a 1. Retaining bolt 2. Hydraulic pump 8. At the bottom of pump housing, remove socket screw securing hydraulic hose lock. smr2009-041-021 RECOMMENDED POSITION 2. Apply LOCTITE 243 (BLUE) (P/N 293 800 060) on threads of lock screw. 3. Tighten screw to 8 N•m (71 lbf• in ). 456 smr2009-041