Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 01 (SUSPENSION (iS)) NOTE: If the upper arm shaft or one of its arm shaft support has been removed or loosened, re- fer to SUSPENSION ARM SHAFTS for proper in- stallation procedure. 2. Tighten screws to 25 N•m (18 lbf•ft). 3. Carefully lower and secure the rear suspension arm to the fixed deck. 3.1 Position the rear suspension arm brackets in accordance with the reference marks previously draw on fixed deck. NOTICE If no mark was traced, refer to REAR SUSPENSION ARM INSTALLATION WITHOUT REFERENCE MARKS for proper procedure to install and align the rear sus- pension arm. smr2009-041-073_a 1. RH lateral rear panel 4.

Mark position of rear suspension arm brackets for proper reinstallation. 5. Remove and discard screws securing rear sus- pension arm to fixed deck. 3.2 Install NEW screws to secure rear suspen- sion arm brackets. 3.3 Tighten screws to 25 N•m (18 lbf•ft). Rear Suspension Arm Installation Without Reference Marks 1. Lower the rear suspension arm on fixed deck. 2. Position the square openings of rear suspen- sion arm brackets so that the threaded inserts in fixed deck are centered. smr2009-041-074_a 1. Rear suspension arm screws 6. Remove and discard screws securing the top of rear suspension arm. smr2009-041-076_a 1. Square opening 2. Threaded insert 3.

On each bracket, install the retaining plate and one screw. 4. Install a weight of 90 kg (200 lb) on vehicle to lower the moving deck. 5. Check moving deck position in comparison to fixed deck. 5.1 Check the gap between moving deck wipers and fixed deck. It should be the same on both sides. 5.2 Check front and rear gaps. Moving deck should be able to move without having contact with the fixed deck. smr2009-041-075_a 1. Retaining screws 7. Remove the rear suspension arm from vehicle. Rear Suspension Arm Installation 1. Using NEW screws, install the top of rear sus- pension arm. 462 smr2009-041