Section 07 BODY AND HULL Subsection 02 (BODY) Tilting Moving Deck for Servicing Watercraft 1. Remove the BOARDING PLATFORM, see pro- cedure in this subsection. 5. Lift the rear suspension arm against seat handle and attach it with locking tie or strap. smr2009-042-012_a 1. Seat handle 2. Ski/wakeboard attachment 3. Locking tie ssi2009-002-002_a 1. Boarding platform 6. Install two pieces of wood (4 x 4) under mov- ing deck front area as shown to avoid potential damage when lifting the moving deck. 2. Remove bolts securing both rear suspension arm covers. smr2009-042-010_a 1. Cover screws 3. Mark position of rear suspension arm brackets for proper reinstallation. 4.
Remove and discard screws securing rear sus- pension arm to fixed deck. smr2009-042-022_a 1. Pieces of wood 7. Place steering in its lower position. 8. Using suitable lifting devices, raise the rear of moving deck to 340 mm (13-1/2 in). smr2009-042-011_a 1. Rear suspension arm 2. Reinstallation marks 3. Screws (discard) 470 smr2009-042