Section 07 BODY AND HULL Subsection 02 (BODY) 15. Install lifting straps. 15.1 Using both mooring cleats under steer- ing, install two lifting straps. smr2009-042-005_a 1. Disconnect these connectors 14. Detach steering cable from steering column. 14.1 Remove bolt securing ball joint to steer- ing column. smr2009-042-079_a 1. Front lifting strap hooks into steering mooring cleats 15.2 Install another lifting strap on seat handle. 16. Attach all lifting straps to an lifting device to lift the moving deck. Make sure lifting device is located at the center of the vehicle to rise moving deck horizontally. 17. Raise moving deck slowly and drive steering cable out of steering column. 18.
Place the moving deck on a level surface. Moving Deck Installation 1. Install 2 pieces of wood under lateral supports. smr2009-042-006_a 1. Steering cable ball joint 2. Steering column 14.2 Remove bolts retaining steering cable clamp. 14.3 Unlatch steering cable clamp. smr2009-042-071 smr2009-042-007_a 1. Steering column 2. Steering column clamp bolts 3. Steering column clamp 4. Steering cable adjusting nut 2. Slowly, lower the moving deck just enough to able to insert the end of steering cable in steer- ing column. NOTICE Make sure not to pinch electrical har- ness while lowering the moving deck. 14.4 Place steering in its lower position. 14.5 Free steering cable from fixed clamp.
smr2009-042 473