Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 07 BODY AND HULL Subsection 02 (BODY) smr2009-042-074_a 1. Steering cable 2. Steering column smr2009-042-015_a RH SIDE SHOWN 1. Retaining screws (new) 3. Install steering cable clamp and its bolts. Do not tighten bolts yet. 6. Remove pieces of wood located under lateral supports and reposition one under moving deck front area. smr2009-042-007_a 1. Steering column 2. Steering column clamp bolts 3. Steering column clamp 4. Steering cable adjusting nut 4. Connect the four electrical connectors under moving deck. smr2009-042-090_a 1. Install piece of wood here 7. Remove the front lifting straps. 8. Open seat. 9. Raise rear of moving deck until suspension is clear of moving deck.

NOTICE Make sure not to raise the rear of moving deck more than 340 mm (13-1/2 in). smr2009-042-005_a 1. Connect these connectors 5. Lower the front of moving deck and secure it on both lateral supports using NEW screws. smr2009-042-023_a 1. Use this rivet as reference point A. 340 mm (13-1/2 in) 474 smr2009-042