Section 02 ENGINE Subsection 03 (INTAKE MANIFOLD) smr2009-018-008_a 1. Engine connector 2. ECM support smr2009-018-005_a 1. Ignition coil connectors 2. Fuel injector connectors Unplug the knock sensor (KS), the magneto and the throttle actuator connectors. Unplug the "B" connector from the ECM by pulling the lock. Refer to WIRING DIAGRAM subsection for procedure. Unplug the manifold air pressure sensor (MAPS), the engine connector and the manifold air temper- ature sensor (MATS). smr2009-018-009_a 1. KS connector 2. Magneto connector location 3. Throttle actuator connector Pull the knock sensor (KS) and magneto connec- tors out of the ECM support.
For more details, re- fer to ELECTRICAL CONNECTORS. smr2009-018-007_a 1. MAPS connector 2. Engine connector location 3. MATS connector Pull the engine connector out of the ECM support. smr2009-018-010_a 1. KS connector 2. Magneto connector 3. ECM support smr2009-018 33