Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 03 (INTAKE MANIFOLD) Unplug the oil pressure switch (OPS). smr2009-018-011_a 1. Oil pressure switch (OPS) Lift intake manifold up to pull it out of the mount- ing brackets. Unscrew ECM retaining screws and remove ECM from its support. smr2009-018-012_a 1. ECM retaining screws 1. Mounting brackets Pull the engine wiring harness with the ECM plugged away from intake manifold. Remove manifold retaining screws and push the oil dipstick tube out of the manifold slot. Pull intake manifold out. Intake Manifold Inspection Check intake manifold for cracks, warping at flanges or any other visible damage.

Check if intake manifold gaskets are cracked, brit- tle or otherwise damaged. Replace damaged parts as necessary. Intake Manifold Installation For installation, reverse the removal procedure. Pay attention to following details. Ensure that all gaskets are properly installed and in good condition. 34 smr2009-018