Section 02 ENGINE Subsection 04 (SUPERCHARGER) NOTE: It may be necessary to heat the housing with a heat gun to release the retaining disc. 1. Supercharger shaft 8. Remove and discard ball bearing from super- charger shaft by using a press and the SUPER- CHARGER RETAINING KEY (P/N 529 036 027) . 1. 4-pin socket 10. Discard the oil seal. 11. Remove and discard ball bearing from super- charger housing half (engine side) by using a press and a suitable bearing pusher. 1. Supercharger shaft 2. Ball bearing 3. Retaining key 1. Supercharger housing half (engine side) 2. Bearing pusher Supercharger Inspection 9.
Screw out retaining disc with seal from hous- ing half (engine side) by using the 4-PIN SOCKET (P/N 529 035 948) . Supercharger Clutch Components and Gear Check the wear limit on drive gear, lock washer and driven plate on supercharger shaft. Check drive gear for cracks. NOTE: If parts are worn out or damaged, repair supercharger only by using supercharger repair kit. 529035948 46 smr2009-020