Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 05 (INTERCOOLER) smr2009-019-009_a 1. Garden hose installed on water outlet 2. High and regular water flow 7. Perform a leak test before installing the inter- cooler in the watercraft. 529021800 BLEED HOSE FITTING Pressurize the intercooler. Intercooler Leak Test Using a LARGE HOSE PINCHER (P/N 529 032 500) , block intercooler water inlet and outlet hoses. PRESSURE TEST 69 kPa (10 PSI) for 10 minutes min. If there is a pressure drop, first spray tool, hoses and adapters with a soapy water solution to en- sure they are not leaking. Otherwise, replace the intercooler. Intercooler Removal Open the boarding platform. Remove both storage baskets.

From the LH opening, disconnect the intercooler water hoses and the bleed hose. 5290325002 Disconnect the bleed hose from intercooler. smr2009-019-002_a MANY PARTS REMOVED FOR CLARITY PURPOSE 1. Intercooler 2. Intercooler water outlet hose 3. Intercooler water inlet hose 4. Bleed hose smr2009-019-002_a MANY PARTS REMOVED FOR CLARITY PURPOSE 1. Intercooler 2. Intercooler water outlet hose 3. Intercooler water inlet hose 4. Bleed hose Install the VACUUM/PRESSURE PUMP (P/N 529 021 800) on bleed hose fitting. Disconnect both air hoses. smr2009-019 55