Bombardier Recreational Products Inc. (BRP) Sea-Doo RXT iS255 GTX LIMITED — Print Preview - C:\DOCUME~1\coderma\LOCALS~1\Temp\.aptcache\smr2009Piranhaen6/tfa03092

Section 02 ENGINE Subsection 06 (EXHAUST SYSTEM) 4. Gently disconnect the hose from blow-by valve. smr2009-016-005_a 1. Exhaust hose clamp 8. Detach retaining strap. smr2009-016-003_a 1. Cut this locking tie 2. Water outlet hose (exhaust system) 3. Blow-by hose 4. Blow-by valve 5. Exhaust manifold 5. Unscrew exhaust clamp. NOTICE Do not use pneumatic or electrical tools as seizure may occur. smr2009-016-006_a 1. Muffler retaining strap 9. Remove the LH rear storage basket. 10. Move muffler backwards and slide it through the rear opening. smr2009-016-007_a 1. Exhaust clamp Muffler Inspection Check muffler for: Cracks Corrosion Other damages. Check if exhaust hose is:

Brittle Hard Cracked Otherwise damaged. Replace any defective part. 6. Unplug the exhaust gas temperature sensor (EGTS). Muffler Installation With a new muffler, install the EXHAUST GAS TEMPERATURE SENSOR. See procedure further in this subsection. Open muffler adjusters by sliding adjuster blocks. smr2009-016-004_a 1. EGTS sensor 2. Exhaust hose 7. Disconnect the exhaust hose from muffler. smr2009-021 63