Section 02 ENGINE Subsection 07 (PTO HOUSING AND MAGNETO) WARNING Always disconnect battery cables exactly in the specified order, BLACK negative cable first. 2. Remove the moving deck and deck extension. Refer to BODY subsection. 3. Drain the engine oil. Refer to LUBRICATION SYSTEM subsection. 4. Remove the cylinder head cover. Refer to CYLINDER HEAD subsection. 5. Using SUCTION PUMP (P/N 529 035 880) , insert the tube in the lower area of the timing chain. Syphon remaining oil. smr2009-020-005_b 1. Supercharger Refer to STEERING AND PROPULSION and re- move the following: Jet pump Drive shaft Drive shaft bellows. Disconnect CPS connector from wiring harness. smr2006-006-003_a 1.
Oil siphoning tube 2. Edge of cylinder block 6. Drain engine coolant, refer to the COOLING SYSTEM subsection. Remove the air intake silencer. Refer to AIR IN- TAKE SYSTEM subsection. Remove the supercharger air outlet hose. Move muffler rearwards. Refer to EXHAUST SYS- TEM subsection. Remove the supercharger, refer to the SUPER- CHARGER subsection. smr2008-023-016_a CPS CONNECTOR Disconnect the magneto connector from wiring harness. The connector is located between ECM and throttle body. 72 smr2009-022