8 Encoder diagnostics | Diagnosis for encoders with TTL/HTL/HTLs/ interface 8.6.4 Switching signals screen for TTL 1 3 2 4 5 Figure 40: Switching signals screen 1 Signal level of the switching signal: gray (low) / green (high) 2 Rising edge 3 No value determined 4 Locking function 5 Falling edge On the Switching signals screen, the proper functioning of switching signals, e.g., such as homing and limit signals, can be checked. For information on the availability and function of the switching signals, please refer to the encoder documentation or the Interfaces of HEIDENHAIN Encoders brochure. You can evaluate different Switching signals . The available options are shown in the More menu.
Further information: "Function settings screen ", Page 108 The encoder must be homed to ensure the proper functioning of the display. A corresponding note is shown upon initial display or after a refresh. HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 101