heidenhain PWT 100, PWT 101 — Diagnostic values of online diagnostics

Encoder diagnostics | Diagnosis for encoders with serial interface 8 Diagnostic values of online diagnostics Position display The Position display (4) shows absolute or incremental position values depending on the encoder model. Absolute : absolute position value Incremental : incremental position value RM display not filled: encoder reference run not yet performed RM display filled: encoder reference run completed Tapping the display opens the Datum shift screen. Further information: "Datum shift screen ", Page 71 Revolutions Multiturn encoders transmit the number of revolutions in addition to their singleturn position.

m = Number of distinguishable revolutions Value range according to specification 0 ... m-1 revolutions Value range displayed on the product: 1 ... m revolutions Revolution 0 in the specification corresponds to revolution 1 in the product's display. Typical gear-based multiturn encoders have 12 bits available for the transmission of the multiturn value. Therefore: Number of distinguishable revolutions m = 2 12 = 4096 revolutions Value range according to specification 0 ... 4095 revolutions Value range displayed on the product: 1 ... 4096 revolutions Status The Status display (8) shows whether there are any messages about the connected encoder. Green: There are no messages Red:

There are messages Tapping the display opens the Encoder status screen. Further information: "Encoder status screen", Page 75 Mounting clearance The values shown in Mounting clearance [mm] (5) make it easy to verify if the encoder is mounted correctly. Certain encoders generate values, such as the mounting clearance, that enable you to easily verify if the encoder is mounted correctly. If supported by the encoder, these values are transferred via the interface and displayed by the product in the Online diagnostics screen. For the nominal values of the mounting clearance, refer to the mounting instructions for the respective encoder.

64 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024