8 Encoder diagnostics | Diagnostics for encoders with 1 V PP /11 µA PP /1 V PP + Z1 interface Function settings screen Figure 32: Function settings screen The Function settings screen enables you to switch on/off special encoder functions. The setting options vary depending on the encoder functions. The product adapts the displayed setting options correspondingly. Deactivating the terminating resistor You can activate or deactivate the terminating resistor on the product. The terminating resistor is activated in the default setting. The terminating resistor should be deactivated only in exceptional cases (for example, if two subsequent electronics are connected to an encoder).
Tap More The More menu is opened. Tap Functions The Function settings screen is opened. Tap the Terminating resistor is active option The terminating resistor is deactivated. Tap Back The changed settings are applied. The Function settings screen is closed. HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 89