heidenhain PWT 100, PWT 101 — Display options for count value screen

8 Encoder diagnostics | Diagnostics for encoders with 1 V PP /11 µA PP /1 V PP + Z1 interface Setting evaluation options for switching signals Tap More The More menu is opened. Tap Functions The Function settings screen is opened. Tap the desired mode of evaluation of the switching signals The switching signal evaluation was successfully selected. Tap Back The changed settings are applied. The Function settings screen is closed. Activating the "X1 Pin 15 = Up" function Some encoders provide auxiliary functions that are controlled via the voltage level at pin 15. The function is deactivated in the default setting. For more information, please refer to the encoder documentation.

Display options for count value screen Figure 33: Display options for count value screen The Display options for count value screen enables you to define display options for the count value. The setting options vary depending on the encoder functions. The product adapts the displayed setting options correspondingly. Encoders with EnDat interface and additional incremental signals allow manual setting of the count value. HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024 91