heidenhain PWT 100, PWT 101 — Display settings screen

Encoder diagnostics | Diagnostics for encoders with 1 V PP /11 µA PP /1 V PP + Z1 interface 8 Display settings screen Figure 35: Display settings screen The Display settings screen enables you to change the units of the measured values of the encoder. The setting has an effect on the count values displayed. Selection Description Steps Incremental display of counting values. Indicated in signal periods. Rotatory The count values are displayed as Angle [degrees] . You have to enter the encoder's line count. Linear The count values are displayed as Position [µm] . You have to enter the signal period of the encoder. The choice of the count value unit affects all screens.

Opening Display settings Tap More The More menu is opened Tap Units The Display settings screen is opened 94 HEIDENHAIN | PWT 100, PWT 101 | Operating Instructions | 07/2024