BAIC BJ2021 and BJ2022 series light-weight off-road vehicles — Start and stop the vehicle

Start and stop the vehicle 108 11. Remove the B-pillar trim panel. 2 10. Slowly lower the front windshield Loosen the fastening bolt of the seat belt height adjuster, and then remove the seat belt height adjuster (the picture here takes the right side of the vehicle as an example). according to the direction of the arrow shown in the figure, and fasten the windshield firmly to the engine hood. To do this, you need to remove the seat belt height adjusters on both sides (the picture here takes the right side of the vehicle as an example) Pry off the seat belt height adjuster housing as shown in the figure.

The front windshield can be firmly fixed on the engine hood with the windshield fixing strap in the on-board vehicle. Tip The bolt has a torque requirement of 45 ± 10N·m during installation. WARNING