Removing and fitting vibration damper, replacing front crankshaft gasket Fig. 9 The adapter must lie free of clearance on the crankshaft so that the right press-in depth of the bearing race is ensured. 8 Pull the bearing race as far as it will go into the press-in sleeve Б on the adapter with collar nut and thrust washer ( В and Г in Fig. 8). Note: The bearing race can also be mounted when the cover is fitted. 9 1 7 Fig. 10 As spare parts the cover and shaft seal are delive- red only as a complete assembly in order to en- sure correct installation. So that it remains possible to mount the shaft sea- ling ring, it must stay on the transport and installa- tion sleeve until assembly. 10 Fig.
11 Fit the cover with a new seal. 11 71