honda — Throttle Bracket/Shift Lever/Handlebar (Tiller Handle Type Only)

BF40AeBF50A STEERING BRACKET Install a new steering handle busing when it has been removed. Apply grease to the inside of the steering handle bush- ings, both ends of the 12 mm thrust washer, inside of the distance collar and both ends of the wave washer. Clean off grease on the threads of the 12 x 80 mm hex. bolt, then tighten the 12 mm hex. nut to the specified torque. TORQUE: 29 N*m (3.0 kgfam, 22 Ibfdt) Hold the 12 mm hex. nut and tighten the 12 mm lock nut to the specified torque. TORQUE: 54 N*m (5.5 kgf*m, 40 Ibfdt) [2] 14 mm WAVE WASHER \ [l] 12 mm LOCK NUT [3] DISTANCE COLLAR 141 i /STEERING BRACKET 1 54 N*m (5.5 kgf*m, 40 Ibf*ft) \ \ .

/ 1 29 N*m (3.0 kgfmrn, 22 Ibfsft) L A h 1 1 - [5] 12 mm WASHER 161 12 x 80 mm HEX. BOLT / [81 12 mm THRUST WP 171 \ STEERING HANDLE BUSHING (2) I Do not reuse. I 15-1 8