Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

134 Maintenance Section Differential and Final Drive Oil Level - Check SEBU7645-06 6. Replace the dipstick/fill plugs for each differential. Operate the machine for a few minutes and allow the oil to flow completely through the axles. Remove the dipstick/fill plugs and recheck the oil level. Add oil, if necessary. 7. Clean the dipstick/fill plugs and instail the dipstick/fill plugs for each differential. 102310335 Differential and Level - Check Final Drive Oi! g00615943 SMCS Code: 3278-535-FLV; 4011-535-FLV Iustration Before you measure the oil level, operate the 3. Remove the dipstick/fill plug for the rear differential. Check the oil level. machine for a few minutes.

This will allow all of the oil to reach a common level. Park the machine on level ground. Lower the bucket and apply slight downward pressure. Engage the 158 4. Maintain the oil level between the “ADD” mark and the “FULL” mark on the dipstick/fill plug. Add oil, if necessary. Replace the dipstick/fill plug. parking brake. Stop the engine. 102091494 Differential and Final Drive Oil Sample - Obtain SMCS Code: 3278-008; 4011-008; 4070-008; 7542 NOTICE Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may Itlustration 157 g00615872 contaminate the samples that are being drawn.

This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers. 1. Remove the dipstick/fill plug for the front differential. Check the oil level. 2. Maintain the oil level between the “ADD” mark and the “FULL” mark on the dipstick/fill plug. Add oil, if necessary. Replace the dipstick/fill plug. Illustration 159 In order to obtain a sample of the differential and final drive oil, remove the filler plug. VVithdraw the oil through the filler opening.